Metals Protected: Cold rolled steel; sheet metal stamping; automotive parts.
Multi-metal inhibitor for general industrial use. Used as a wash, it leaves behind a lubricant and corrosion preventive film. Will not affect priming, painting, sealing, welding or cleaning operations. Easy to remove by conventional cleaning methods. Approved for use in automotive manufacturing.
Nox-Rust 5400 is a multi-metal inhibitor for general industrial use. Used as a wash, it leaves behind a lubricant and corrosion preventive film. It will not interfere with assembly sealers, adhesives, painting, welding, and cleaning solutions. Easy to remove by conventional cleaning methods. Approved for use in automotive manufacturing -- cold rolled steel, sheet metal stamping, automotive parts. Sold in pails, drums, and aerosol cans.
Metals Protected: Steel; compatible with brass, aluminum, copper.
Leaves a sparkling luster on treated metal. Removes water after using an aqueous cutting oil. Non-staining. Won’t clog stamping machines. Repels water from metal surfaces. Dries as a transparent, non-discernible film. Removal not required.
Does your company manufacture springs, machine tools, compressors, gears, drive shafts, precision parts, watch components, taps, drills, and parts for refrigeration, aviation or transportation? Any plant operation with a stamping operation using water-base cutting fluids likely needs Nox-Rust 7100.
It is a light, water-displacing, transparent oil that repels residual cutting fluids. It will not clog stamping dies, a crucial benefit. It is also non-staining, another important quality for in-plant or cross plant processing.
The light oil dries to a soft dry film which is barely noticeable, except for the sparkling luster it puts on treated metal. Parts remain protected for 3-6 months indoors. Apply by dip, spray or brush. In most cases, removal is not necessary.
Metals Protected: Steel; metalworking, precision parts.
Ideal lubricant for high precision equipment and parts. Compatible with barium lube grease. Excellent lubricating oil for assembly parts.
Experienced users of Nox-Rust 7800 call it the best all-purpose lubricant they have ever tried! Shop mechanics, for example, use it for temporary corrosion protection, un-seizing a stubborn nut to keeping machines running smoothly.
Nox-Rust 7800 is a water displacing, low viscosity lubricant and corrosion preventive liquid. It will protect both ferrous and non-ferrous parts during storage and covered transit at low film thickness. No mixing or preparation is required.
It has the unique capability to creep and penetrate into very tight and hard-to-reach spaces. It remains fluid at -70°F, which is why the military uses it a gun oil for firearms in cold climates.
Nox-Rust 7800 is also ideal in transit and transportation industries, machined parts and even routine maintenance shop use. Apply it by spray, dip or brush. Corrosion protection is effective up to 12 months. If removal is required, use mineral spirits, hot alkaline wash or high pressure steam.
Metals Protected: Steel
Final rinse additive. Retards corrosion during shipment and storage of machined parts, tools, treated steel and assemblies. Water-displacing.
Nox-Rust 9300 is an all-purpose corrosion inhibitor additive for final stage rinse. It retards corrosion during shipment and storage of machined parts, tools, treated steel and assembles. Can be diluted with water or petroleum solvent. The light, transparent liquid can also be applied by dip, spray or brush. It dries as a thin, oily emulsion. Protection lasts 3-9 months.
Metals Protected: Steel
Synthetic, water-based fluid. Removes dirt, debris from steel before mill oils are applied.
Nox-Rust 9700 is a synthetic, water-based fluid designed as a final and in-process RP additive. Removes dirt and debris from steel before mill oils are applied. Add to cutting fluids, metal working fluids, or final stage rinse. It is water-displacing, and compatible with zinc and copper.